3-44 Customer Programming Software (CPS)
6866537D87-F Chapter 3 - MTM800 Product Information Manual September 2008
14.10 Mail In
This is a factory preset feature indicating that the Mail In feature (text messaging) is enabled in the
phone. The Mail In feature enables Reception, Reading and Deletion of Messages.
14.11 Mail Out
This option is used to enable/disable the Mail Out feature (text messaging) in the terminal. The Mail
Out features allows the user to Create, Store, Send, Reply, and Delete Messages.
Related Fields:
Paragraph 26.1.1 "Outgoing Mail Options"
Paragraph 26.1.2 "Outgoing Mail List"
Paragraph 28.2 "One-Touch Options"
Paragraph 28.3 "One Touch Buttons"
14.12 External Device
Selecting this feature enables the user to connect an external device (also called peripheral
equipment) to the phone, such as a laptop or desktop PC. The phone then operates then as a
wireless modem, sending or receiving data from another subscriber.
14.13 Test Page
Selecting this option enables field engineers to access various internal data via the test page sub
menu.
14.14 Horn & Light
If this feature is enabled, the vehicle’s horn will sound and the lights will flash to announce an
incoming private/phone call. This feature requires the installation of a kit.
Check box to enable this option.
14.15 PABX
This option is used to enable/disable the terminal’s PABX Mode of operation.
See related fields:
Paragraph 25 "Contact Book"
Paragraph 28.2 "One-Touch Options"
Paragraph 28.3 "One Touch Buttons"
14.16 Talkgroup Scan
Specifies whether the phone's Talkgroup Scan feature is enabled or disabled.
If this field is enabled, the phone, instead of just monitoring its selected talkgroup will monitor (scan)
more than one talkgroup sequentially.
To Next Page
Loading...
