GPS 3-135
September 2008
Chapter 3 - MTM800 Product Information Manual 6866537D87-F
going back or going round the first point. Also the excursion may escape notice because the journey
time is within the time period between consecutive checks.
The range setting for this option is 0 to 2147483 m, the default is 500 m.
30.6 Loss of GPS Coverage Profile
If the terminal detected loss of GPS coverage and if this profile is enabled, it will send an Unsolicited
Location Report based on its last known location.
See Paragraph 30.3 "Normal Periodic Profile" for a description of the Field Name options.
Additional field:
30.6.1 GPS Max Acquisition Delay
Indicates the default maximum time (in seconds) allowed for the acquisition of the current location.
At the end of the specified acquisition period, the following will happen:
• If the terminal has a signal, the terminal will get the LRRP report with Location Data.
• If the terminal has not acquired a fix to the requested accuracy, the terminal will get the LRRP
report without location data and with an error indication plus the reason.
The range for this setting is 0 - 2147483 seconds, the default is 45 seconds.
30.7 Recovery of GPS Coverage Profile
To Next Page
Loading...
