3-8 Customer Programming Software (CPS)
6866537D87-F Chapter 3 - MTM800 Product Information Manual September 2008
3.4 Displayed Codeplug File
A new icon is now displayed with the codeplug and if the codeplug is maximised in the work screen,
the icon will move to the left of the File option.
This icon, when selected, gives the following options:
The Restore, Move, Size Minimise and Maximise options are used to position or alter the size of the
viewed code plug screen. I.e. if the screen has been maximised, selecting restore will return it to the
size it was when first opened.
If two or more code plugs are displayed on the work screen, selecting the ‘Next’ option will high light
the next code plug and make it the current active (for editing) code plug.
To Next Page
Loading...
