3-118 Customer Programming Software (CPS)
6866537D87-F Chapter 3 - MTM800 Product Information Manual September 2008
28.2.2 One Touch Function Button Keypress Timer
The entry in this field sets the time duration that a programmable Side Button must remain pressed
before the one-touch functionality is activated.
It has a range of 10 to 5000 msecs, the default being 10 msecs.
28.3 One Touch Buttons
This feature allows often used terminal features/options to be programmed to the keypad buttons
and function keys as a one touch button feature. The ‘Feature Flag’ menu options must be selected
to see all available options.
To select the required button option, place the pointer into the ‘Field Value’, click on the down arrow,
place the pointer on the required option and select the option by clicking the left mouse button.
Once the option has been selected, more Field Names and Field Value entries will be displayed
requiring more information for the selected option.
Note: The same option, but with different parameters, may be repeatedly assigned to different but-
tons, i.e. Sending Predefined Message - a different message would be assigned.
Apart from ‘unassigned’, there are another the following available options:
• Covert Mode
• Display Time
• PABX call
• Phone call
• Private call
• TXI (Transmit Inhibit)
• Sending Predefined Message
• Sending User Defined Message
• Hi/Lo Audio
• Change Talkgroup
• Sending Targeted Status
• Sending Status
• TMO <-> DMO Switch
• Home Revert
• TMO Talkgroup Scan
To Next Page
Loading...
