1-32 Product Overview
6866537D87-F Chapter 1 - MTM800 Product Information Manual September 2008
• Enhanced Security
• Permanent Disable
7.1 Software Selling - Tools and Mechanisms
For MR5.7 the chosen approach is a dongle with counters for each one of the features. The features
are enabled at the same time the customer programs the radio. This will happen in one operation.
• A dongle is connected to the PC which is used to configure the TETRA terminal.
• The dongle has a counter for each of the features.
• The dongle counters are “charged” as per what the customer has ordered/purchased
(e.g. MSPD in 100 TETRA terminals.
• Every time a feature is enabled in a terminal the dongle counter is decreased for the
feature in question.
Note:
For activating the appropriate features please refer to chapter “Customer Programming Software”,
paragraph “Enable Features” or refer to the CPS Start-Up Manual ((P/N 6802974C10_) on the CPS
CD for more information on how to implement the supplied software.
To Next Page
Loading...
