Feature Flags 3-47
September 2008
Chapter 3 - MTM800 Product Information Manual 6866537D87-F
If the terminal is involved in an announcement group call or is still within the Rx-timer period of an
announcement group call when the hot-mic transmission is initiated, the Hot Mic group call will be
made to the Announcement Group.
Note: In normal circumstances there will not be a case of Rx-hold timer in an emergency call, since
the hang timer on the call is very long and the Rx-hold Timer starts when Tx-ceased is received.
Note: Hot Mic functionality does not work when the terminal is in the DMO operational mode.
Related field is:
Paragraph 22.1 "Hot Mic"
14.20 DMO Gateway
This feature allows the terminal to work with DMO Gateway(s).
The DMO Gateway is a device that provides gateway connectivity between terminal and the TETRA
Voice and Data (V+D) network. The gateway provides the interface between the TETRA DMO and
TETRA V+D modes. A gateway may provide only the gateway function (DM-GATE) or may provide
the functions of both a DM repeater and a DM gateway during a call (DM-REP/GATE).
This feature can be Enable/Disable by clicking in the check box.
14.21 One-Touch Feature
This feature enables often used functions to be assigned to a singe button press on the numeric
keypad button.
Related fields are:
Paragraph 28.2 "One-Touch Options"
Paragraph 28.3 "One Touch Buttons"
14.22 My Favorite Groups
Enabling this feature allows the user to create a ‘Personal’ range of groups from those held in both
the TMO and DMO Talkgroup lists of the terminals memory.
Related field:
Paragraph 24.3 "My Favorite Groups"
14.23 Speed Dialing
Selecting this option will enable the speed dialing functionality of the terminal.
If this feature is enabled, a speed dial number is added to numbers in the contacts list.
Turn the check box on (Enable) or off (Disable) by clicking in the check box.
14.24 GPS
Select this option to enable the GPS (Global Positioning System) feature of the terminal.
Paragraph 30 "GPS"
To Next Page
Loading...
