EasyManua.ls Logo

Motorola MTM800 - 17.1 Time Displayed; 17.2 Date Displayed; 17.3 Time Format; 17.4 Date Format

Motorola MTM800
290 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Clock System Broadcast Information 3-59
September 2008
Chapter 3 - MTM800 Product Information Manual 6866537D87-F
The System Broadcast Information is sent over the air interface to provide the parameters that the
MS needs in order to access the SwMI system.
As a part of the system synchronisation information, TETRA network time information element in D-
NWRK-BROADCAST PDU is sent to the MS. The MS uses this element for the Time Received &
Displayed feature.
The Time Received & Displayed feature allows to:
Automatically update time according to the current time zone when in TMO mode or if Dual
Watch is on and use of MS internal clock when in DMO mode or in DMO base mode if Dual
Watch is off or out of service.
Display time-of-day and date on the MS screen.
Time-stamp text messages and status received by the MS. The SDS (Short data Services)
feature will include date stamp information the MS received from the network's broadcast of
Time & Date.
17.1 Time Displayed
Defines whether time is displayed to the MS user.
Turn the check box on (Enable) or off (Disable) by clicking in the check box.
The setting of this parameter can also be changed via the MS MMI.
17.2 Date Displayed
Determines if date should be visible on home screen and one-touch button Time-Display action.
Turn the check box on (Enable) or off (Disable) by clicking in the check box.
The setting of this parameter can also be changed via the MS MMI.
17.3 Time Format
Defines the time format to be displayed to the MS user.
The possible values are "24-h clock" or "12-h clock".
To change the setting, select the field value, and select desired setting.
The setting of this parameter can also be changed via MS MMI.
17.4 Date Format
Sets the date format (DD - day number, MM - month number, MON - month abbreviation, YY - year
number).
The options are:
dd/mm/yy
mm/dd/yy
dd-mon-yy
To select the option, put the pointer into the field value, click on the arrow, and drag the pointer to the
desired option.
The setting of this parameter can also be changed via the MS MMI.

Table of Contents

Other manuals for Motorola MTM800

Related product manuals