File Menu 3-13
September 2008
Chapter 3 - MTM800 Product Information Manual 6866537D87-F
4.9 Import Menu
Note: This option is only available if the ‘Administrator’ password has been used to open the CPS
and has the following two options:
4.9.1 Import User Data
This option is used to import data from a user data file into the active or current codeplug file and
importing user data into a codeplug will REPLACE the existing entries.
In the Open User Data dialogue box, select the desired file name and click OK. The application will
place the user data in the appropriate fields (for example, phone list entries will appear in the Phone
List table).
When reading a user data file, the application will ignore entries and lists that are not valid for the
active phone mode.
To prevent a CPS crash, Do Not use question marks in the alias/name fields of any file.
Note: To create a user data file, open the codeplug file from which to copy the desired data. Then
use the Export User Data function to create the file.
Note: Use the Export and Import User Data functions to download data to several phones i.e. call
list data.
4.9.2 Screen Saver
This feature is not supported for the terminal model MTM800 with standard and motorcycle control
head.
4.10 Export Menu
Note: These 3 options are only available if the ‘Administrator’ password has been used to open the
CPS:
To Next Page
Loading...
