3-30 Customer Programming Software (CPS)
6866537D87-F Chapter 3 - MTM800 Product Information Manual September 2008
Enables the serial ports to be used in CPS-to-phone communication.
To define the working port and the communication speed, use the pointer and select the down
arrows of the option windows and drag the pointer down to the desired value.
Serial Port selection options.
Note: Refer to your computer User Manual for a complete description of serial and parallel ports
7.7.4.4 Directories
This is used to specify the default paths of the directories for codeplug, software and backup files.
Note: If there are several versions of Tetra CPS installed on the PC, these paths MUST be
configured as soon as the CPS is first launched, as the paths may default to existing directories.
To Next Page
Loading...
