1.2.2.2 Volume
The volume can be set by either choosing a fixed value or by configuring
freely assignable controls. We recommend using rotary potentiometers that
are installed on the front (Item No.: 75756).
The variometer volume is configured separately.
With the PROFI TX 16, the volume can also be controlled via mixers.
The volume control data is stored in the model memory.
1.2.2.3 MagicSwitch
The number of MagicSwitches was doubled from 2 to 4.
Each MagicSwitch now has an additional OR input.
1.2.2.4 Switching thresholds
The switching thresholds of controls that are installed on the front were changed
from 50% to 95% (rotary potentiometers are used as switches).
1.2.2.5 Timer
The specialised timers were replaced by universal timers.
Three operating modes are available for each timer: frame, sum, and
interval
The counting mode can be selected: Up or Count down
You can select to have the time announced within 5 minutes before an
alarm occurs or the zero point is passed.
The timers can be renamed as desired.
1.3 Contact
Should you still have any questions regarding your PROFI TX, please feel free to
contact your specialist dealer who will be happy to assist you.
Service partners
The addresses of our service partners are available on our website:
www.multiplex-rc.de
To Next Page
Loading...
