5.2 Operation using the wheel
You can use the central wheel to navigate through the menus and to edit set
values. The wheel can be turned in increments to the left or to the right and it can
be pressed.
Turning the wheel
In the status displays:
Every increment in the clockwise / anti-clockwise direction cycles to the next
status display or back to the previous status display.
In the menus:
Every increment in the clockwise / anti-clockwise direction moves the cursor
to the next / previous menu item.
In a scrollable field:
Every increment in the clockwise / anti-clockwise direction increases /
reduces the value or the content of the scrollable field.
Pressing the wheel
Press the wheel to open / close an input field or to trigger a function. Pressing the
wheel has the same effect as pressing the ENTER button (see section 5.1.2
"Buttons for special functions" on page 165).
To Next Page
Loading...
