3.3.3 TRACKED V. model template
This model template is suitable for tracked vehicles.
Control function assignments and names can be changed as required.
Completed tracked vehicle models typically contain a functional building block that
combines "Throttle" and "Steering" for the two power systems.
If you are using 2 separate speed controllers, it is recommended to change the
servo assignment for Steering and Throttle to TRACK+ (page 149).
TRACK+ stands for a mixer that combines "Throttle" and "Steering". You configure
the required settings in the £ Mixer menu (page 132).
Set a small deadband value in the mixer for Steering. If "Steering" and "Throttle"
are assigned to the same stick unit, opening the throttle often involves a small
steering movement. Applying a deadband to "Steering" solves this problem.
To personalise control, 4 mixers on the control side and 6 mixers on the servo side
are provided, each with eight inputs.
Controls assignment, control function, and settings
To Next Page
Loading...
