EasyManua.ls Logo

Multiplex Profi TX - Control Mixers (Ctrl.MIX)

Multiplex Profi TX
227 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
The menus
Page 134
PROFI TX
Mode
Possible values:
OFF
The differential is switched off.
ON
The differential is switched on.
+SPOILER
If the ailerons are raised as an additional landing aid,
+SPOILER should be selected here.
The differential is then reduced incrementally as the spoiler is
extended. The aileron travels in the downward direction are
increased. As a result, aileron response is enhanced when
the ailerons are raised.
Differnt.Ail
Flight phase specific setting for the differential level.
If the differential is incorrect (aileron travel is reduced in upward direction
instead of downward), reverse the value (REV/CLR button).
4.5.1.3 Control mixers (Ctrl.Mix)
For fixed-wing models, 2 control mixers are provided. They mix the signal of any
second (Source) control function into any (Target) control function. The mixer
takes effect on all servos that are connected to the target control function directly or
via mixers.
Travel+ / Travel-
Mixing level.
Increment: 1%
Setting range: -100% - OFF - +100%
Source
Control function to be mixed in. The mixer is added without any control
settings (Expo, D/R, Travel, Trim).
Target
Control function to be mixed into the Source.

Table of Contents

Other manuals for Multiplex Profi TX

Related product manuals