1.10 Warranty
Our products are covered by the statutory warranty regulations. If you wish to make
a claim under warranty, please contact the model shop where you purchased the
product.
The warranty does not cover defects and malfunctions caused by the following:
improper operation, wrong connections, terminal reversal
use of third-party components; modifications and repairs that were not
carried out at an authorised MULTIPLEX Service Centre
damages caused by the use of force
defects due to improper use and / or normal wear and tear
operation of the equipment outside the technical specifications
Observe the information leaflets included in the relevant transmitter documentation!
1.11 EC declaration of conformity
The PROFI TX devices were assessed in accordance with the relevant harmonised
European directives.
You are therefore the owner of a product whose design fulfils the protective aims of
the European Community relating to the safe operation of equipment.
The detailed declaration of conformity can be downloaded from our website:
www.multiplex-rc.de
under
DOWNLOADS / Product Information
If required, you may also send us your request for the declaration of conformity by
post:
MULTIPLEX Modellsport GmbH & Co.KG
Customer Service
Westliche Gewerbestraße 1
D-75015 Bretten-Gölshausen, Germany
To Next Page
Loading...
