4.5 Mixer main menu
You configure the mixers in this menu.
The menu is partially dynamic:
The menu content differs for fixed-wing models and helicopter models.
Mixers on the servo side are only listed if they are in use, i.e. they are
assigned to a servo.
Mixers on the control side are always listed, e.g. "Combi-Switch",
"Differnt.Ail".
Opening the menu
To open the main menu: Button
4.5.1 Fixed-wing models
Overview
Linkage of aileron and rudder, making it easy to fly accurate turns.
Aileron differential for flying accurate turns
Various mixers for the aileron servo. For multiple servos, simply assign
the same mixers repeatedly.
V-tail with mixers. For models with V-tail, the names of the elevator and
rudder servos are changed to V-TAIL+. Then, only rotation directions
and travels need to be set.
Mixers for the ailerons, e.g.: spoiler for raising the ailerons.
Freely configurable mixers
Mixer for mixing on the control side.
Number, names and functions of the mixers may vary between model templates.
The mixers Combi-Switch, Differnt.Ail, and Ctrl.Mix are
always listed.
The 7 mixers on the servo side are only listed if they are assigned
to a servo.
4.5.1.1 Combi-Switch
The Combi-Switch links aileron and rudder in a way that allows both of the control
functions to be controlled by either of the functions. This makes it easier to fly
accurate turns.
To Next Page
Loading...
