2.3.1 Opening and closing the case ......................................... 31
2.3.2 Adjusting stick units ..................................................... 33
2.3.2.1 Swivelling stick units ................................................. 33
2.3.2.2 Adjusting ratchet, friction and centring force .................... 34
2.3.3 Installing stick tops with a switch or button .......................... 35
2.3.4 Installing additional controls ........................................... 36
2.3.5 Installing additional modules .......................................... 39
2.4 Transmitter battery ............................................................. 40
2.4.1 Charging the battery .................................................... 40
2.4.1.1 Charging via the PC ................................................. 41
2.4.1.2 Charging the battery using the plug-in charger ................. 42
2.4.2 Removing the battery ................................................... 42
2.4.3 Inserting the battery ..................................................... 42
2.4.4 Battery management ................................................... 43
2.5 Switching the transmitter on / off ............................................ 44
2.5.1 Switching on ............................................................. 44
2.5.2 Switching off.............................................................. 45
2.6 Range check .................................................................... 46
2.7 Trainer mode ................................................................... 49
2.8 Digital trim ....................................................................... 50
2.8.1 Overview .................................................................. 50
2.8.2 Trim buttons .............................................................. 51
2.8.3 On-screen trim display ................................................. 51
2.9 microSD card ................................................................... 53
2.9.1 Replacing the microSD card ........................................... 53
2.9.2 microSD card from a different transmitter ........................... 53
2.9.3 New microSD card ...................................................... 53
2.9.3.1 Directory structure on the microSD card ......................... 54
3 Model templates 55
3.1 Templates for fixed-wing models ............................................ 56
3.1.1 BASIC model template ................................................. 58
3.1.2 ACRO model template ................................................. 61
3.1.3 GLIDER+ model template.............................................. 64
3.1.4 DELTA WING model template ........................................ 67
To Next Page
Loading...
