Journal Printer
How to Replace the Dot-Matrix Journal Printer Ribbon
5-20 NCR Personas M Series 5887 Operator Manual
7 Turn the knob on the cassette in the direction of the arrow to
tighten the ribbon.
8 Replace the protective cover on the rear of the printer.
9 Push the printer back into the ATM until it clicks into place.
10 Follow your in-house procedures for indicating that you have
replaced the journal printer ribbon.
11 If your ATM does not have the auto-supervisor option, press the
switch on the operator panel to the normal position.
12 Close and lock the exterior of the ATM.
To Next Page
Loading...
