NCR 5887 - Removing Captured Media

Letter Quality Document Statement Printer
Removing Captured Media
NCR Personas M Series 5887 Operator Manual 6-19
Removing Captured Media
6
Statements which are retracted from the printer transport are placed
in the capture area. To remove captured statements, proceed as
follows:
1 Open the exterior of your ATM.
2 If your ATM does not have the auto-supervisor option, press the
switch on the operator panel to the supervisor position.
3 Access the statement printer as described in Chapter 1, ‘Getting
Started’.
4 Remove any captured statements from the capture area. Check
that there are no statements stuck to the roof of the area.
Type 1
6
Type 2
6
Ca
p
ture Area
Capture Area