Coin Dispenser
Clearing Jams
NCR Personas M Series 5887 Operator Manual 13-3
Clearing Jams
13
A jam in the coin dispenser module will be indicated by an error
message, displayed on the operator interface.
To clear jams in the coin dispenser, proceed as follows:
1 Open the coin dispenser door.
2 If your terminal does not have the auto-supervisor option, press
the switch on the operator panel to the supervisor option.
3 Access the coin dispenser as described in Chapter 1, ‘Getting
Started’.
4 Remove the coin cassette.
Note: Take care when removing the coin cassette not to damage
any of the facia wiring.
5 Check for, and remove, any bent or mis-aligned coins in the
cassette.
6 Check for any spills or foreign matter in the cassette. If
necessary, clean the cassette with a soft, damp cloth.
To Next Page
Loading...
