Getting Started
How to Use the Enhanced Operator Panel
1-10 NCR Personas M Series 5887 Operator Manual
How to Use the Enhanced Operator
Panel
1
The Enhanced Operator Panel (EOP) is located on the rear of the
ATM and can be viewed through the clear panel on the top-box
door. The operator panel is used to display any error messages and
to access the various System Application or State of Health (SOH)
options.
System Application options are described in the NCR publication
‘APTRA™ Self-Service Support System Application User Guide’, (B006-
6167).
State of Health options are described in the NCR publication
‘Supervisor Functions’ manual, (B006-4718).
The following illustration shows the layout of the EOP.
The five indicators on the EOP have the following meanings:
● IN-SERVICE - this is illuminated to show that the ATM is
available for transactions
● SUPERVISOR - this is illuminated to show that the ATM is in
the Supervisor Mode and not available for transactions
● ERROR - this is illuminated to indicate a fatal software error
● POWER - this is illuminated to show that the EOP is receiving
power from the ATM
● COMM - this flashes to indicate that the ATM is communicating
with a host system.
Normal
In Service
Supervisor
Power
Error
Comm
Reset
Supervisor
1
2
3
4
5
6
78
9
0
CLR
CNL
ENT
To Next Page
Loading...
