Cash Acceptor
Cleaning Sensors
11-22 NCR Personas M Series 5887 Operator Manual
Locating the Sensors
11
The following illustration shows the areas which contain sensors for
cleaning.
To clean the sensors in the cash acceptor, proceed as follows:
1 Open the exterior of the terminal.
2 If your terminal does not have the auto-supervisor function,
press the switch on the operator panel to the supervisor
position.
3 Access the cash acceptor as described in Chapter 1, ‘Getting
Started’.
Area 1
Area 2
Area 3
Area 4
Reject Unit
Cleaning Lever
To Next Page
Loading...
