Getting Started
How to Unlock and Lock a Controlled Access Electronic Lock
1-24 NCR Personas M Series 5887 Operator Manual
2 Turn the lock dial counterclockwise to activate the bolt and
charge the lock until IPI is displayed on the LCD.
3 Hold the PI key against the key reader.
4 Take a note of the unique 4-digit close code that is displayed, as
it will be required by the KMC.
5 Close the exterior of the ATM.
6 Contact the KMC.
Note: Ensure that all the locks and doors on the ATM are closed
and locked before contacting the KMC.
7 Verify identification.
8 Provide the 4-digit close code to the KMC.
9 The KMC will inform you that either the code is correct or give
you the correct procedure to follow if the close code is wrong.
Unlocking the Sub-Lock
1
If a sub-lock is configured on your Cheque Acceptor door, proceed
as follows:
1 Carry out Steps 1 to 10 of “Unlocking the Master Lock”.
Note: The code displayed on the LCD will depend on which area of
the ATM you requested access to.
2 Insert the key into the keylock on the locking handle and turn it
counterclockwise.
To Next Page
Loading...
