Getting Started
How to Unlock and Lock an Electronic Lock
1-18 NCR Personas M Series 5887 Operator Manual
How to Unlock and Lock an
Electronic Lock
1
Unlocking
1
To unlock the security enclosure proceed as follows:
1 With the keypad in its vertical position, enter the first six digits
of the combination (set to 123456 when shipped from factory). If
the sequence is entered correctly, the lock will beep and the led
flash. If the lock has been set to operate on a single combination,
proceed to step 3.
2 If the lock is set to operate on a dual combination, enter the
second six digits of the combination (set to 456789 when shipped
from factory). If the sequence is entered correctly, the lock will
beep and the led flash.
3 Turn the keypad clockwise to unlock the lock.
To Next Page
Loading...
