NCR 5887 - Removing and Replacing the Ribbon Cassette; Single Line Endorser

Cheque Acceptor
Removing and Replacing the Ribbon Cassette
12-16 NCR Personas M Series 5887 Operator Manual
Removing and Replacing the Ribbon
Cassette
12
The position of the ribbon cassette depends upon the type of
endorser guide unit contained in the cheque acceptor. The two types
are a single line endorser or a multiple line endorser as shown
below.
Single Line Endorser
12
To replace the ribbon cassette in the single line endorser, proceed as
follows:
1 Open the exterior of the terminal.
2 If your terminal does not have the auto-supervisor option, press
the switch on the operator panel to the supervisor position.
3 Access the module as described in ‘Getting Started’.
Multiple Line
Endorser
Single Line
Endorser