NCR 5887 - How to Remove Captured Cards from a Motorised Card Reader; Standard Card Capture Container

Motorised Card Reader
How to Remove Captured Cards from a Motorised Card Reader
NCR Personas M Series 5887 Operator Manual 10-5
How to Remove Captured Cards
from a Motorised Card Reader
10
The procedure for removing captured cards will vary depending on
the type of card capture bin with which your ATM is configured.
The instructions relate to both the Motorised and the Integrated
Motorised Card Reader.
Standard Card Capture
Container
10
To remove captured cards, proceed as follows:
1 Open the exterior of the ATM.
2 If your ATM does not have the auto-supervisor option, press the
switch on the operator panel to the supervisor position.
3 Access the card reader as described in ‘Getting Started’.
4 Remove the cards from the card capture container, which is
positioned behind the card reader, and slide the card reader
back into the ATM.
5 Follow your in-house procedures for indicating that you have
emptied the card capture container.