Page Turn Passbook Printer
How to Remove Captured Passbooks
8-8 NCR Personas M Series 5887 Operator Manual
How to Remove Captured Passbooks
8
To remove any passbooks which have been retracted from the
printer transport and placed in the capture bin proceed as follows:
1 Open the exterior of the ATM.
2 If your ATM does not have the auto-supervisor option, press the
switch on the operator panel to the supervisor position.
3 Access the passbook printer as described in Chapter 1, ‘Getting
Started’.
4 Remove the captured passbooks from the rear of the printer.
5 Push the printer back into the ATM until it clicks into place.
6 If your ATM does not have the auto-supervisor option, press the
switch on the operator panel to the normal position.
7 Close and lock the exterior ATM top-box.
To Next Page
Loading...
