Statement/Passbook Printer
How to Remove Captured Statements and Passbooks
7-18 NCR Personas M Series 5887 Operator Manual
How to Remove Captured
Statements and Passbooks
7
To remove any statements or passbooks which have been retracted
from the printer transport and placed in the capture bin proceed as
follows:
1 Open the exterior of the ATM.
2 If your ATM does not have the auto-supervisor option, press the
switch on the operator panel to the supervisor position.
3 Access the statement/passbook printer as described in Chapter
1, ‘Getting Started’.
4 Lift the flap in the side of the printer and remove the captured
media from within the bin. Lower the flap
.
5 Push the printer back into the ATM until it clicks into place.
6 Follow your in-house procedures for indicating that you have
emptied the capture bin.
7 If your ATM does not have the auto-supervisor option, press the
switch on the operator panel to the normal position.
8 Close and lock the exterior of the ATM.
To Next Page
Loading...
