Getting Started
How to Do a Hardware Reset of Your ATM
NCR Personas M Series 5887 Operator Manual 1-33
How to Do a Hardware Reset of Your
ATM
1
A reset switch is provided on the operator panel. When the reset
switch is pressed the ATM executes its diagnostic procedures,
reloads the system software and initialises the user application
program.
To reset the ATM, proceed as follows:
1 Open the top-box of your ATM.
2 Press the reset switch on the operator panel.
3 Close and lock the ATM.
Note: After you reset your ATM it will take several minutes for the
ATM to load all its software and to start displaying your
application.
Reset
To Next Page
Loading...
