Statement/Passbook Printer
How to Replace the Print Head
7-8 NCR Personas M Series 5887 Operator Manual
How to Replace the Print Head
7
The indications that the print head needs to be replaced are:
● An error message that the print head life expectancy has been
reached
● A visual check of statements/passbooks shows that the print
head is not operating correctly.
Warning The print head becomes hot when in operation. After operation,
leave the print head to cool before touching it.
To replace the print head proceed as follows:
1 Open the exterior of the ATM.
2 If your ATM does not have the auto-supervisor option, press the
switch on the operator panel to the supervisor option.
3 Switch off the ATM. Press the power button in at the “0” side.
4 Access the statement/passbook printer as described in Chapter
1, ‘Getting Started’.
To Next Page
Loading...
