Getting Started
In-service Replenishment
NCR Personas M Series 5887 Operator Manual 1-9
In-service Replenishment
1
If your application supports In-service Replenishment you will be
able to replenish most of the terminal’s modules while the ATM
remains in service. These modules include the:
● Magnetic Card reader/Writer
● Currency Dispenser
● Receipt printer
● Journal Printer
● Document, Statement and Passbook Printers.
Individual transactions or components of transactions will be de-
configured while the device they rely on is being replenished. For
example, no receipt will be available while the receipt printer is
being replenished.
Depending on your application, when you attempt to enter the
Supervisor Mode you will be prompted through the Operator Panel
to select either the Supervisor Mode (taking the ATM out of service)
or to enter the In-service Replenishment Mode.
When in the In-service Replenishment Mode, depending on your
application, the menu will:
● Prompt you to select the device, or part of device, to be serviced
● Tell you when the device is available for In-service
Replenishment
● Tell you when the device replenishment is complete.
The remainder of this manual is written for terminals which do not
have In-service Replenishment. However, other than the entering of
the In-service Replenishment Mode, the procedures for replenishing
of all devices is exactly the same whether the ATM supports In-
service Replenishment or not.
To Next Page
Loading...
