Enhanced Page Turn Passbook Printer
How to Remove Captured Passbooks
NCR Personas M Series 5887 Operator Manual 9-9
How to Remove Captured Passbooks
9
To remove any passbooks which have been captured from the
printer transport and placed in the capture bin, proceed as follows:
1 Open the exterior of the ATM.
2 If your terminal does not have auto-supervisor, press the switch
on the operator panel to the supervisor option.
3 Access the printer as described in Chapter 1, ’Getting Started’.
4 Remove the passbook from the capture bin.
5 Push the printer back into the terminal until it clicks into place.
6 Follow your in-house procedures for indicating that you have
removed the captured passbook(s).
7 If you terminal does not have auto-supervisor, press the switch
on the operator panel to the normal position.
8 Close and lock the exterior of the ATM.
Capture Bin
To Next Page
Loading...
