Preface
What This Manual Contains
xiv NCR Personas M Series 5887 Operator Manual
What This Manual Contains
This manual is divided into chapters as follows:
● Chapter 1 - “Getting Started” - Introduces the 5887, shows the
locations of modules, and describes the basic procedures
required to access and start using the ATM and its component
modules. This includes a description of ‘racking’ the modules in
and out of the ATM, which is not described in detail in the
relevant module section.
● Chapter 2- ”Error Reporting” - Describes how to read the ATM’s
error reporting systems.
The following chapters describe how to carry out the various
replenishment and jam clearance operations, and how to remove
any media which have been captured by each module. Details of
how to access the modules are covered in Chapter 1 “Getting
Started”.
● Chapter 3 - “Currency Dispenser”
● Chapter 4 - “Receipt Printer”
● Chapter 5 - “Journal Printer”
● Chapter 6 - “Letter Quality Document Statement Printer”
● Chapter 7 - “Statement/Passbook Printer”
● Chapter 8 - “Page Turn Passbook Printer”
● Chapter 9 - “Enhanced Page Turn Passbook Printer”
● Chapter 10 - “Motorised Card Reader”
● Chapter 11 - “Cash Acceptor”
● Chapter 12 - “Cheque Acceptor”
● Chapter 13 - “Coin Dispenser”
● Chapter 14 - “Cleaning and Maintenance” - Describes the
preventive maintenance procedures for 5887 ATMs.
Note: This manual has been written for use with ATMs which run
either S4I or APTRA™ Self-Service Support system software.
If your ATM uses S4I, it will use State Of Health (SOH) and the
supervisor interface described in the “Supervisor Functions”
manual, (B006-4718).
If your ATM uses APTRA Self-Service Support, it will use the error
reporting system and supervisor interface programs described in
the “APTRA Self-Service Support System Application User Guide”
(B006-6167).
To Next Page
Loading...
