NCR 5887 - How to Unlock and Lock a Standard Security Enclosure

Getting Started
How to Unlock and Lock a Standard Security Enclosure
1-12 NCR Personas M Series 5887 Operator Manual
How to Unlock and Lock a Standard
Security Enclosure
1
The standard security enclosure of your ATM will have a locking
handle plus one lock (a primary lock), or two locks (a primary and a
secondary lock). The possible lock types for primary and secondary
locks are as follows:
● Primary lock types:
● Keylock
● Combination lock
● Combination lock with silent alarm
● Combination lock with integral keylock
● Secondary lock types:
● Keylock
● Combination lock
● Combination lock with silent alarm
● Combination lock with electronic override.
Note: The make of lock fitted (Standard or Sargent and Greenleaf)
depends on the configuration of the ATM. The procedures for
opening and closing the locks are the same for both makes.
The following illustration shows the relative positions of primary
and secondary locks.
0
90
80
70
60
50
40
30
20
10
0
90
80
70
60
50
40
30
20
10
Primary Lock
Secondary Lock
Locking Handle