How to Replace the Paper
-1
NCR Personas M Series 5887 Operator Manual
7
Statement/Passbook Printer
7
How to Replace the Paper
7
ATM consumables can be ordered from the NCR Systemedia ATM
Consumables Group. Please contact your NCR account Manager for
more information.
Note: It is very important to the operation of the printer that all
paper used is free of tears and creases, and that the paper lies flat in
the paper hopper.
The following steps detail how you should replace the printer
paper.
1 Open the exterior of the ATM.
2 If your ATM does not have the auto-supervisor option, press the
switch on the operator panel to the supervisor position.
3 Access the statement/passbook printer as described in Chapter
1, ‘Getting Started’.
4 If the paper is not completely exhausted, push down the paper
feed switch on the top of the printer as shown below. When the
paper stops moving, pull the end of the paper out of the printer.
To Next Page
Loading...
