Getting Started
How to Access the Modules
1-30 NCR Personas M Series 5887 Operator Manual
Motorised Card Reader
1
To gain access to the card reader, press the green latch and use the
green handle to pull the module tray out of the ATM until its slides
are fully extended. The receipt and journal printers will also slide
out.
The card reader is located underneath the receipt printer, at the back
of the module tray. Pull out the receipt printer transport locking
plunger, as shown below, and then raise the receipt printer
transport.
To return the card reader, pull out the receipt printer transport
locking plunger and then lower the printer transport to its normal
operating position, then push the module tray back into the ATM
until it clicks into place.
1
2
2
1
To Next Page
Loading...
