Cheque Acceptor
Emptying the Cheque Bins
12-2 NCR Personas M Series 5887 Operator Manual
Emptying the Cheque Bins
12
The cheque acceptor has two types of cheque deposit bin: the open
bin or power pockets. Both are situated in the same area of the
cheque acceptor. The open bin stores all cheques in one open
storage container whether captured or as a result of successful
transactions. The power pocket variant has three separate storage
containers, one of which can store captured cheques independently
of successfully transacted cheques (depending on your
organization’s specification and business rules). The cheques are
driven to the correct pocket by powered track guides.
If a cheque has been captured and cannot be returned to the
cardholder, it will be stored in the open bin or in the capture bin of
the power pocket variant. Following a successful transaction,
cheques are stored in the open bin or in the cheque receiving bins of
the power pocket variant. Sensors in these areas may initiate an
error message when the bins need to be emptied.
Open Bin
12
To remove cheque(s) from the open bin, proceed as follows:
1 Open the exterior of the terminal.
2 If your terminal does not have the auto-supervisor option, press
the switch on the operator panel to the supervisor position.
3 Access the module as described in ‘Getting Started’.
To Next Page
Loading...
