Getting Started
How to Unlock and Lock an Electronic Lock
NCR Personas M Series 5887 Operator Manual 1-19
4 Turn the keylock clockwise to unlock the lock.
5 Turn the safe handle counterclockwise to open the door.
Note: If when entering a combination you enter the wrong
combination 4 times, a 5 minute time delay period is activated.
During this time the led on the lock will flash red at 10 second
intervals. You must wait until the end of the 5 minute period before
attempting to enter the correct combination.
Note: If fitted, the silent alarm may be activated by entering one
number higher or lower for the last digit of a combination. For
example, if the combination was 1-2-3-4-5-6, entering 1-2-3-4-5-5 or
1-2-3-4-5-7 would activate the silent alarm.
Note: Repeated beeping of the lock during an opening sequence
indicates that the lock battery requires replacing. If the lock keypad
is completely “dead”, that is, it makes no sound or flashes, follow
the emergency opening procedure to open the lock prior to having
the battery replaced.
Locking
1
To lock the security enclosure proceed as follows:
1 Close the security enclosure door and turn the handle clockwise.
2 Turn the keylock counterclockwise
3 Turn the keypad counterclockwise until the keypad is vertical.
The door should now be locked.
To Next Page
Loading...
