Cleaning and Maintenance
Cleaning
14-6 NCR Personas M Series 5887 Operator Manual
● Benzene
● Petrol
● Acetone
● Carbon tetrachloride
● Paint stripper of any kind.
Keyboards vandalized by paint should not be cleaned. The
keyboard should be replaced.
Dip Card Reader
14
To clean the heads you will require a cleaning card (NCR part
number 998-0052929 or equivalent).
To clean the dip card reader heads, proceed as follows:
1 Open the exterior of the ATM.
2 If your ATM does not have the auto-supervisor option, press the
switch on the operator panel to the Supervisor position.
3 Follow your in-house procedures for instructions on how to run
either the System Application or Supervisor Mode, depending
on the System Software used.
4 Prepare the cleaning card according to the instructions enclosed
with it.
5 Insert the cleaning card into the card reader with the cleaning
face downwards. Remove the card from the reader. Repeat this
action five times.
6 If your ATM does not have the auto-supervisor option, press the
switch on the operator panel to the Normal position.
7 Close and lock the ATM.
Motorised Card Reader
14
If configured, refer to the motorised card reader chapter in your
ATM manual for details of cleaning activities.
Enhanced Page Turn
Passbook Printer
14
If configured, refer to The Enhanced Page Turn Passbook printer
chapter in your ATM Manual for details of cleaning activities.
Cash Acceptor
14
If configured, refer to the cash acceptor chapter in your ATM
manual for details of cleaning activities.