Getting Started
How to Insert and Remove Disks
1-36 NCR Personas M Series 5887 Operator Manual
4 To remove a flex disk from the disk drive, fully press in the eject
button on the drive. This will eject the disk allowing you to
remove it.
5 If fitted, close the disk drive security cover then lock or seal it as
required by your organization.
6 Close and lock the ATM.
CD-ROM in a Type 1 Core
1
To insert and remove a CD-ROM from the drive in a Type 1 core
proceed as follows:
1 Open the top-box of your ATM.
2 If a disk drive security cover is fitted, unlock or remove the lock
or seal supplied by your organization, then pull out the popper
and pull out the cover as far as it will go.
Note: If your ATM has an enhanced alarm system fitted, the
disk drive security cover may be alarmed. If this is the case, you
To Next Page
Loading...
