Getting Started
How to Insert and Remove Disks
NCR Personas M Series 5887 Operator Manual 1-41
CD or DVD-ROM in a
Type 2 Core
1
To insert and remove a CD or DVD-ROM from the drive in a Type 2
core proceed as follows:
1 Open the top-box of the ATM.
2 If a disk drive security latch is fitted, unlock or remove the lock
or seal supplied by your organization, then pull out the popper
and pull out the latch as far as it will go.
Note: If your ATM has an enhanced alarm system fitted, the
disk drive security latch may be alarmed. If this is the case, you
should follow your organization’s procedures for accessing an
alarmed area.
To Next Page
Loading...
