Statement/Passbook Printer
How to Replace the Ribbon
NCR Personas M Series 5887 Operator Manual 7-7
7 To tighten the ribbon turn the knob on the cassette in the
direction of the arrow.
8 Push down the print head and ribbon cassette carrier until it
clicks in position. The printer will be reset when the carrier is
pushed down.
9 Push the printer back into the ATM until it clicks into place.
10 Follow your in-house procedures for indicating that you have
replaced the statement printer ribbon.
11 If your ATM does not have the auto-supervisor option, press the
switch on the operator panel to the normal position.
12 Close and lock the exterior of the ATM.
To Next Page
Loading...
