Getting Started
How to Unlock and Lock a Standard Security Enclosure
NCR Personas M Series 5887 Operator Manual 1-17
3 Turn the key in the keylock counterclockwise and then remove
the key.
4 Lock the combination lock by turning the dial at least four
complete turns counterclockwise.
Customer Setting Combination
1
If the combination has been set at a three-number combination, for
example 36-82-44, unlock it as follows:
1 If a keylock is fitted to the combination lock, insert the key into
the lock and turn it clockwise.
2 Turn the dial counterclockwise, passing the first number (36)
three times, stop on the first number (36) the FOURTH time.
3 Turn the dial clockwise, passing the second number (82) twice,
and stop on the second number (82) the THIRD time.
4 Turn the dial counterclockwise, passing the third number (44)
once, and stop on the third number (44) the SECOND time.
5 Turn the dial clockwise until it stops. The lock is now open. Use
the handle on the door to retract the door bolt and open the
door.
How To Lock The Combination Lock
1
To lock the combination lock, turn the dial at least four complete
turns counterclockwise. Turn the dial until 0 is in line with the
opening index and then turn the key counterclockwise and remove
it from the lock.
How To Change The Combination
1
Detailed instructions on how to change the combination of a lock
are inside the security enclosure.
To Next Page
Loading...
