NCR RealPOS User Manual

6-16 Chapter 6: Special Programming
3. Scan the HEX 4 Tag.
Hex 4
24986
4.
Scan the HEX A Tag.
Hex A
24987
The scanner will speak the firmware level. It will say: “PXA scanner 4 9 7 …”.
Make sure to write down the numbers being spoken after “4 9 7”. This will be used to
determine the next step.

NCR RealPOS Specifications

General

Scanning Technology	Laser
Interface	RS-232, USB
Supported Barcodes	UPC/EAN, Code 39, Code 128, Interleaved 2 of 5, Codabar, MSI, Code 93
Storage Temperature	-40° to 70° C (-40° to 158° F)
Humidity	5% to 95% (non-condensing)