NCR RealPOS User Manual

Chapter 5: Programming 5-39
Enable General DataBar Expanded
Program Mode, Hex 7, Hex 1, Hex E, Save and Reset
Enables all DataBar Expanded
except AIs specifically disabled
(default)
Disable General DataBar Expanded
Program Modes, Hex 7, Hex 1, Hex F, Save and Reset
Disables all DataBar Expanded
except AIs specifically enabled
Specifically Enable DataBar AI 8110
Program Mode, Hex 7, Hex 1, Hex 3, Save and Reset
Program Mode, Hex 7, Hex 1, Hex 2, Save and Reset
Set DataBar Expanded AI 8110
enable (default)
Specifically Disable DataBar AI 8110
Program Mode, Hex 7, Hex 1, Hex 1, Save and Reset
Program Mode, Hex 7, Hex 1, Hex 0, Save and Reset
Set DataBar Expanded AI 8110
disable (default)
Specifically Enable DataBar AI 019x
Program Mode, Hex 7, Hex 1, Hex 7, Save and Reset
Program Mode, Hex 7, Hex 1, Hex 6, Save and Reset
Set DataBar Expanded AI 019x
variable measure enable (default)
Specifically Disable DataBar AI 019x
Program Mode, Hex 7, Hex 1, Hex 5, Save and Reset.
Program Mode, Hex 7, Hex 1, Hex 4, Save and Reset
Set DataBar Expanded AI 019x
variable measure disable (default)

NCR RealPOS Specifications

General

Scanning Technology	Laser
Interface	RS-232, USB
Supported Barcodes	UPC/EAN, Code 39, Code 128, Interleaved 2 of 5, Codabar, MSI, Code 93
Storage Temperature	-40° to 70° C (-40° to 158° F)
Humidity	5% to 95% (non-condensing)