NEC Storage M100 Series - Figure 4-12: Choose Destination Location

Release 6.0 104
User Guide Chapter 4 NEC Storage Manager
8. Select where the software will be installed. If you want to install the software in the shown
destination, click Next. If you want to install the software in a folder other than the shown
destination, click Browse to select the folder you want to use.
Figure 4-12: Choose Destination Location
9. Install the software as you are prompted by the instructions.
If you install JRE in this step, perform the JRE preparation described in Section 4.2:
“Before Starting NEC Storage Manager Client”