NEC Storage M100 Series - Figure C-19: Iscsi Initiator Properties (Discovery Tab) Screen; Figure C-20: Isns Server Add Screen

Release 6.0 334
User Guide Appendix C How to Set/Check Application Server (Windows) (iSCSI)
Settings when using iSNS (Internet Storage Name Service) server
Perform the following settings:
a. Under the Discovery tab in iSCSI Initiator Properties, click the Add button.
Figure C-19: iSCSI Initiator Properties (Discovery Tab) Screen
b. Enter the IP address of the iSNS server under IP address or DNS name of server.
Make sure the entry is correct, and then click the OK button.
Figure C-20: iSNS Server Add Screen
 Microsoft iSNS Server must be installed in a Windows server on the
same network as the application server.
 For detailed description of iSNS server, refer to manuals and other
documents provided separately from Microsoft Corporation.