NEC Storage M100 Series - 7.3 Initialization by NEC Storage Manager

Release 6.0 211
User Guide Chapter 7 Initializing a Disk Array (SAS)
7.3 Initialization by NEC Storage Manager
7.3.1 Initialization Wizard
7.3.1.1 Overview
Use the initialization wizard to make the basic settings of a disk array.
Operations to be performed on the initialization wizard are:
 Set the disk array subsystem name
Change and/or confirm a disk array name.
 Set time
Set time by configuring the NTP server, or manually.
 Unlock licenses
Unlock licenses.
 Host connection port parameters (SAS)
Set the host connection port.
7.3.1.2 Starting the initialization wizard
Click Configuration and Initialization on the left pane to open the menu. Then click Start to start the
initialization wizard.
Figure 7-3: Starting Initialization Wizard
Before the initialization starts, the following confirmation message appears.