NEC Storage M100 Series - Executing Rescan; Figure H-20: Hardware Configuration Screen (1); Figure H-21: Hardware Configuration Screen (2)

Release 6.0 418
User Guide Appendix H How to Set/Check Application Server (VMware) (iSCSI)
H.2.1 Executing Rescan
Perform the following steps:
1. Use VI Client to select a server, then select Storage Adapter as the configuration hardware setting.
2. Click Rescan under Storage Adapter.
Figure H-20: Hardware Configuration Screen (1)
3. Click Properties in Details.
Figure H-21: Hardware Configuration Screen (2)
Select an available software Initiator from displayed list of available iSCSI software
adapters. This brings up a display of Initiator details such as the model name, IP
address, iSCSI name, detection method, iSCSI alias, and various detected targets.