NEC Storage M100 Series - Figure C-31: Log on to Target Screen

Release 6.0 349
User Guide Appendix C How to Set/Check Application Server (Windows) (iSCSI)
Additional host port registration
6. Click the OK button.
Figure C-31: Log On to Target Screen
For description of CHAP authentication, refer to Appendix N: "Retrieve Initiator
Information on Application Servers Registered with iSNS Server".
The Target Secret that is set here is a password that a target uses to
authenticate an Initiator. This password is also required for settings on the
disk array side (see Section: 15.3.21 iSMcfg setldsetchap in the NEC
Storage Manager Command Reference), so be sure to write it down so it
is not forgotten.