Release 6.0 69
User Guide Chapter 3 Installing the Disk Array System
3.2 Installation
3.2.1 Mounting a Disk Array Unit on a Rack
This section describes how to install a disk array unit and a disk enclosure in a rack.
The following describes how to attach the rack mount kit that has come with this disk array system to a
rack:
Figure 3-2: Rack Mount Kit
Follow the descriptions in Installation Guide.
A disk array unit weighs up to 31Kg (when 3.5-inch hard disk drives are installed). A
disk enclosure weighs up to 29Kg (when 3.5-inch disk drives are installed).
They must be mounted on a rack by two or more persons.
Mount disk enclosure(s) and then a disk array unit from the top of a rack.
Table 3-1: Components of Rack Mount Kit
No. Component name Quantity
1 Rail (L) 1
2 Rail (R) 1
3 M5 screw 12
4Cable clamp 4
5 Repeat tie 5
To Next Page
Loading...
